8
ENGLISH
Maintenance
• Keep the motor housing ventilation slots clean and
uncovered.
• Apply compressed air after each use.
• In case of malfunctioning go only to a
Authorized Service Center
Cleaning and care
Carbon brush replacement
• Replace worn (burnt, broken or smaller than 0.19” long)
carbon brushes. Use new carbons.
• When replacing carbons always replace both carbons at
the same time.
• To access the worn carbons, first remove the carbon´s
cover with the help of a flat screwdriver
• Place the new carbons (They should fall into the carbon
holders easily and slide without getting stuck).
• Place the cover again and allow the machine to run for a
few minutes without workload so that the carbon brushes
adjust better.
• Use only original spare carbon
brushes, designed specifically with the right strength and
electric resistance for each type of motor. Carbon brushes
with different specifications may damage the motor.
