E582EN_02.DOC
Operation
7
4. Operation
Caution
Damage to property due to high power-supply voltage!
Motor damage.
¾
Check the power supply voltage. The power-supply voltage
must correspond to the information on the nameplate of the
machine.
Warning
Risk of injury to hands!
¾
Do not reach into the processing line with your hands.
¾
Do not reach into the space between the oscillating lever and
the abrasive cutting head with your hands or fingers.
Warning
Danger of injury due to improper handling!
¾
Make sure the machine is in a stable position when operating it.
¾
Never touch the tool while the machine is running.
¾
Always operate the machine away from your body.
¾
When working with the machine, wear safety glasses,
protective gloves and work shoes.
Note
Waste metal may arise when machining tubes, profiles and sheets,
which may then become entangled on the abrasive cutting head.
Therefore one should cut tubes in stages and trim sheets in
stages.
