E621EN_01.DOC
Operation
17
Note
If the electric tool does not work after being switched on, stick the
rechargeable battery on the recharger and check the charging
status.
1
1 Charging
status
Rechargeable battery Li-Ion Energy 28 V
Note
Do not subject the machine to heavy loads to such an extent that it
stops.
Never operate the machine without blades.
To protect the machine and for a good cutting performance:
•
Ensure that blades are sharp.
•
Turn insertable cutters in due time.
•
Change insertable cutters in due time.
The following applies when cutting radii:
•
Do not tilt the machine.
•
Only operate at a low feed rate.
Fig. 53294
