Trumpf BendMaster 150, Operator'S Manual

Page: 225 / 258

Interference contour (scratch) has been recognized Fig. 52495
The interference contour looks like the contour searched for and
is identified with a quality of 92%. Since the results for outer
contours have to be sorted by their position
(see "Fig. 52331",
pg. 4
‐
119) , the innermost result, in this case the scratch on the
blank, is always selected.
Solution: interference contour recognized
Reduce the position recognition tolerance.
Ø Set "Predefined settings" to Simple Contour to reduce the
"elasticity" and increase the "acceptance" threshold.
B579EN
2015-06-01 Solving problems and troubleshooting
4
‐
131
Reason