34020-01385 · 00 · 07/2022
5
EN
Safety instructions
Truma CP plus
3.3 Obligations of the operator/ / vehicle
owner
Make sure that the appliance can be operated prop-
erly in all operating phases�
3.4 Installation, dismantling,
repositioning
Only competent, trained personnel (experts) may in-
stall and repair the Truma product and carry out the
function check with consideration of the installation
and operating instructions and the current recognised
rules of engineering� Skilled personnel refers to persons
who are capable of properly carrying out the neces-
sary work and recognising possible hazards based on
their specialist training and education, their knowledge
and experience with Truma products and the relevant
standards�
For experts only
Do not install, dismantle or reposition the
device on your own.
Have the device installed, dismantled or
repositioned only by an expert�
3.5 Important notes
If the power supply to the system has been inter-
rupted, the time / time switch must be reset�
When a new or replacement appliance (heater, air
conditioning system or Truma iNet Box) is connected
to the bus system, repeat the procedure described in
“Initial start-up” (page 12)�
If a Combi heater is connected to the CP plus, you
can no longer use the time switch ZUCB�
