6
Fuses
The fuses are located in the electronic control unit, beneath
the connector cover. When replacing a fuse, be sure to use
the same type.
Device fuse: 10 A – slow – (T 10 A)
Burner fuse: 20 A – slow – 6.3 x 32 mm
T 20 A
T 10 A
Disposal
The heater unit must be disposed of in accordance with the
administrative regulations of the country in which it is in use.
National regulations and laws must be observed.
Technical data
found by Truma Test conditions
Fuel
Fuel, as per the Australian Fuel Standard (Automotive Diesel).
Operation with any form of biodiesel is not permitted.
Water contents
10 litres
Heating up time from approx. 15 °C to approx. 60 °C
Boiler approx. 20 minutes (measured according to EN 15033)
boiler approx. 80 min.
Water pressure
max. 280 kPa
Rated thermal output
(automatic output levels)
2000 / 4000 / 6000 W
Fuel consumption
220 – 630 ml/h (in regular operation, between “Off” and
“lowest operating level” less than 190 ml/h).
Air delivery volume
(free-blowing without hot-air pipe)
max. 287 m³/h
Current input at 12 V
boiler 1.8 – 7 A (in regular operation, between “Off”
and “lowest operating level” less than 1.8 A).
Heating boiler without operational heater, max. 1.8 A
Stand-by: approx. 0.001 A
Weight
(not containing water)
Heater unit:
15.8 kg
Heater unit with peripheral devices: 17.2 kg
Declaration of conformity
The heater complies with heater directive 2001/56/EC and
supplements 2004/78/EC and 2006/119/EC and bears the type
approval number: e1 00 0232
The heater complies with the interference suppression
directive 72/245/EEC for vehicle engines with annexes
2004/104/EC, 2005/83/EC and 2006/28/EC and bears type
approval number: e1 03 5277
The heater complies with low voltage directive 73/23/EEC.
Dimensions
450 mm
525 mm
300 mm
The right to effect technical modifications is reserved!
Summary of Contents for Combi 6
Page 10: ......
Page 11: ...Combi D 6 Australia...
