background image

FCC Statement 

-19-

This device complies with part 15 of the FCC Rules. Operation is subject 
to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including
     interference that my cause undesired operation.
This equipment has been tested and found to comply with the limits for 
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
 
This equipment generates, uses and can radiate radio frequency energy.
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference 
to radio or reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the interference by 
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced technician for help.
MODIFICATION:
Any changes or modifications not expressly approved by the grantee of 
this device could void the user’s authority to operate the device.

FCC ID: 2ABG7-TBG-460

Summary of Contents for TBG-460






















Reviews: