Truly FT602, User Manual

Page: 6 / 29

Quick Start Page 6
Quick Start Page 6

Charging the Battery
There are two ways to charge the battery:
1. Connect the player to your PC using the supplied USB cable. When fully
charged, the lightning bolt will be replaced by “ OK! ”
2. You can charge your FT602 by connecting the USB cable to your computer,
but you cannot use your player while it is being charged this way.
Note:
 It takes approximately 3 hours to charge the battery to full capacity.
 Please use the supplied USB cable. Using another USB cable may cause problems.
 The running battery indicator bar on the screen will show the charging progress. The
indicator bars will be fully lit when the battery is fully charged.
 For better battery performance, it is recommended that you charge the battery for an extra
hour before unplugging the charger. If the battery has been fully charged, do not leave the
player connected to the charger for a long period. After using the battery for the first time, it
is recommended that you charge the battery for two extra hours before unplugging the
charger.

More About Connecting to Your PC
Connecting as an MTP
(
Media Transport Protocol)
device. The FT602 player can be
recognized as an MTP device in Windows XP OS. You must set up the player as an MTP device in
order to manage and play DRM10 protected music tracks.
1. In Settings, select USB Mode and choose MTP.
2. Connect the player to your computer. If successfully connected,
a “ ” icon will appear in the system notification area and the
player will display the following message:
3. A new MTP Device will appear in My Computer .