1/20/97
N
N
T
T
S
S
-
-
2
2
0
0
1
1
.
.
M
M
A
A
N
N
3
3
-
-
7
7
R
R
e
e
v
v
.
.
A
A
where MM is the month, DD is the day and YY is the year. Press the right or left arrow
keys to move the cursor beneath the digit that you wish to change. Press the up or
down arrow keys to scroll through the possible choices. Alternately, directly enter the
numbers using the keypad. The cursor will advance to the next digit automatically.
NOTE: Although an illegal date entry will display, the entry will not be accepted.
3.18.4
Press "FUNC/ENTR" again and the display will show
Date-time
HH:MM:SS
where HH is the hours, MM is the minutes and SS is the seconds.
3.18.5
Press the left or right arrow keys to position the cursor beneath the digit that you wish to
change. Press the up or down arrow keys to scroll through the possible choices.
Alternately, directly enter the numbers using the keypad.
3.18.6
The cursor will advance to the next digit automatically. Press "FUNC/ENTR" to enter the
data. Only valid dates may be entered.
3.19
FUNCTION 04 - SERIAL I/O SETUP
3.19.1
Use function 04 to configure the Serial I/O port. The initial out-of-the-box default values
are:
Baud Rate:
9600
Data Bits:
7
Parity:
Even
Stop bits:
1
3.19.2
The default values on subsequent power-ups will be those in use prior to the previous
power-down.
3.19.3
Press "FUNC/ENTR, then "0" "4". The display will show
Ser port setup
Baud rate 9600
3.19.4
Press the up or down arrow keys to scroll through the possible baud rate choices. When
the display shows the desired baud rate, press "FUNC/ENTR" again and the display will
show:
Ser port setup
Data bits 7
3.19.5
Press the up or down arrow keys to toggle between 7 and 8 data bits choices. When the
display shows the desired choice, press "FUNC/ENTR" again and the display will show:
Ser port setup
Parity even
3.19.6
Press the up or down arrow keys to toggle between even or odd parity. When the
display shows the desired parity press "FUNC/ENTR". The display will show:
Ser port setup
Stop bits 1
