manualshive.com logo in svg

TrueNAS M Series, Setup Manual

Share
Download
TrueNAS M Series Setup Manual Download Page 16

Support: 1-855-473-7449 or 1-408-943-4100                                      

                           Email: 

[email protected]

Page 14

9  Additional Resources

10  Contacting iXsystems

For assistance, please contact iX Support:

Contact Method

Contact Options

Web

https://support.ixsystems.com

Email

[email protected]

Telephone

Monday-Friday, 6:00AM to 6:00PM Pacific Standard Time: 

 

 • US-only toll-free: 1-855-473-7449 option 2 

 • Local and international: 1-408-943-4100 option 2

Telephone

Telephone After Hours (24x7 Gold Level Support only):

 • US-only toll-free: 1-855-499-5131

 • International: 1-408-878-3140 

 

    (International calling rates will apply)

The TrueNAS Documentation Hub has complete software configuration and usage instructions. It is available by 

clicking 

Guide

 in the TrueNAS web interface or going directly to:

https://www.truenas.com/docs/

Additional hardware guides and articles are available in the Hardware section of the Documentation Hub:

https://www.truenas.com/docs/hardware/

The TrueNAS Community forums provide an opportunity to interact with other TrueNAS users and to discuss their 

configurations. The forums are available at:

https://www.truenas.com/community/

Summary of Contents for M Series

















Reviews:

No comments

Brands by name

Popular brands

Load more brands