TrueLife NannyCam R360, Instructions For Use Manual

Page: 7 / 64

6 7
2. Once the camera is removed, navigate to the „Camera pairing“ icon and confirm with the OK
button.
a. Then select the icon (number 1 or 2) to which you want to assign the camera and confirm
with the OK button.
3. At this point, press and hold the „encryption button“ on the bottom of the paired camera until
the camera image appears on the display of the parent unit.
Note: The parent and baby unit are already paired out of the box, so there is no need to do this
again. Select this menu if you want to re-pair units, e.g. if the signal has been lost for a
long period of time.
ALERTS
Here you can set alerts, for example, for feeding, medication or other activities.
Open the menu, navigate to „Alert interval“ and use the „up“ and „down“ arrows to select the
desired time interval and confirm with OK.
OTHER PARENT UNIT SETTINGS
Here you can set the brightness of the display, the time interval of the display on/off, the time and
the temperature units (°C or °F).
VOX – VOX MODE SETTINGS
In this setting you can activate/deactivate VOX mode and set its sensitivity using the „up“ and
„down“ arrows. This setting is ideal for babysitting at night. The camera is activated as soon as it
picks ups crying or any other sound and the parent unit display will light up. Immediately you will
be alerted to the situation and be able to see what is happening. Thanks to the VOX sensitivity
settings, you can prevent it from being activated under normal conditions, giving you peace of
mind.
Sensitivity level
LO – lowest sensitivity (significant noise required to activate)
MI – medium sensitivity
HI – highest sensitivity (low noise required to activate)
Note: After manually turning off the display, the VOX function will not activate until 15 seconds
after the display goes off.