TrueLife NannyCam R360, Instructions For Use Manual

Page: 5 / 64

4 5
USE AND FUNCTIONS
− If both the parent unit and the baby unit are switched on and within range of each other,
the live image from the camera will appear on the display within a few seconds.
− Place the camera in a suitable place and point the lens so that you are satisfied with the
preview.
− The heads of automatically rotating cameras should never be rotated manually! Any
warranty becomes invalid if mechanical damage has been caused by physical rotation.
Note: Do not place the camera within reach of a child. If the image transmission is poor or
intermittent, try relocating the camera or making sure that there are no other electrical
devices nearby that could interfere with the transmission.
Display icons
Signal strength
Temperature at the camera location
Lullaby has been triggered – the number indicates the current melody (1–4)
Parent unit audio
Night mode on
VOX LO
VOX mode – labels (LO, MI, HI) indicate the set VOX sensitivity level
Current time
Timed alert
Displayed camera – number indicates current camera (1 or 2)
Microphone in use
Battery status
Arrows indicating direction of camera rotation
Camera disconnected
Range
As the distance between the baby unit and the parent unit increases, the signal may suffer
interruptions, and the picture and sound may freeze. If the connection is lost due to the distance
being too great, the screen will turn black and the „Camera disconnected” icon will appear. The
parent unit will repeatedly try to connect to the camera.
Note: If the units do not reconnect even after reducing the distance between them, try pairing
the two units up close again, see the following chapter „Menu – pairing“.