Trueheat Trueheat Range Series, Installation And Operation Manual

Page: 21 / 60

SERVICE
FOR YOUR SAFETY, ALL SERVICE WORK MUST BE
CARRIED OUT BY AN AUTHORISED PERSON AND USE
ONLY ORIGINAL SUPPLIED AND SPECIFIED PARTS.
TEST ALL FITTINGS, PIPES AND PIPE CONNECTIONS FOR
LEAKS IN ACCORDANCE WITH APPROVED GAS LEAK
TEST PROCESSES AND METHODS. DO NOT USE A
FLAME.
Note: When checking gas pressure, ensure that all other equipment on
the same line is turned “ON”.
RECOMMENDED SERVICE
It is recommended that your appliance be serviced by an authorized person
every 12 months. This period is for guidance purpose only and may vary based
on usage of the equipment and operator care. Prescribed service tasks
include;
•
Functional test of all components and clean and adjust as necessary.
•
Inspect and clean all gas valves and lubricate with an industry approved
lubricant.
•
Inspect all gas piping.
•
Check and adjust specified gas pressures.
•
Leak test.
•
Full operational, performance and safety test.
SERVICE INFORMATION
To access gas valves, remove control knobs and the front panel.
To remove a gas valve, disconnect the gas valve at the manifold tee spigot
connection and remove the valve.
To access the oven thermostat, refer SPECIFICATIONS ‘Data Plate Access’.
To access open burner thermocouples/pilots, remove trivets.
To access grill burner thermocouples/pilots/igniters, remove grill plate.
To access oven burner thermocouples/pilots/igniters, remove oven base.
Range Manual Page 21 Revision: 13 Sep 07
OPERATOR MANUAL 130907.doc