True Professional 15 Series Installation Guide
28
GENERAL MAINTENANCE
REPLACEMENT PARTS
Keeping the condenser coil clean will minimize required service and lower electrical cost.
The condenser coil is accessible from the front..
The condenser coil should be cleaned by removing dust and other build-up from the tube
assembly with vacuum or a cleaning rag.
When properly cleaned you should be able to see through the tube assembly.
Warranty does not cover cleaning the condenser coil.
True maintains a record of the cabinet serial number for your unit If at any time during the life
of your unit, a part is needed, you may obtain that part by furnishing the model number and
serial number to the company from whom you purchased the cooler. For replacement parts
contact the dealer from whom you purchased the refrigerator or call True parts department at
1-800-424-TRUE. Inquires can be sent to the following address:
Attention Parts Department
True Manufacturing
2001 East Terra Lane
O’Fallon, MO 63366-4434
To ensure a proper installation, this checklist should be completed upon installation to ensure that no
part of the process has been overlooked.
Have all packaging materials been removed?
Is the unit operating properly? If not, is the unit plugged in? Is the control turned on?
Have the anti-tip brackets been installed securely and are they properly engaging the unit?
Is the unit leveled properly with all leveling legs making contact with the floor? Has the kick plate
been installed?
Are panels attached securely and properly aligned? (Overlay cabinets only).
Does the customer understand the unit’s operation?
Has the customer been given the keys and literature package?
Have stainless steel surfaces been inspected for any imperfections? This is to be done by the
authorized True dealer or installer with the customer, upon completion of installation. Stainless
steel doors, handles and shelves are covered by a limited 30-day warranty for cosmetic defects.
INSTALLATION CHECKLIST
