8
TRUE
undercounter
and
worktop
freezers
www
.
truemfg
.
com
SHELF INSTALLATION:
For Proper Shelf Clip Installation Please Read The Following
Instructions.
STEP 1
Install the top tab of the shelf clip into the proper hole. Push up on
the bottom of the clip. (See image 1).
STEP 2
Bottom tab of the shelf clip will fit tightly. You may need to squeeze
or twist the bottom of the shelf clip to install. (See images 2 & 3).
STEP 3
After installation, the shelf clip will fit snug into the shelf standard.
The shelf clip should not be loose or able to wiggle out of the shelf
standard.
SHELF INSTALLATION TIPS
1. Install all the shelf clips before installing the shelves.
2. Start at the bottom in terms of shelf installation and work your
way up.
3. Always lay the back of each shelf down on the rear clips before
the front.
Installing top tab of shelf clip
1
Installing bottom of the shelf clip
2
You may need to squeeze or
twist the bottom of the shelf
clip to install
3
Shelf clip installation complete
4
DRAWER SET 2
REMOVAL
Slide out drawer and locate white drawer retainer.
Push white drawer retainer towards drawer front panel.
Pull up on the white drawer retainer and disengage from drawer.
Image 5.
Pull out and remove drawers.
INSTALLATION
Verify white drawer retainer is in the up position. Image 6.
Insert drawer onto drawer slide and push into position. Image 7.
Secure drawer to slide by pushing down on the white drawer retainer
and pushing back to lock. Image 8.
Verify drawer operation.
5
6
7
8
DRAWER REMOVAL & INSTALLATION
Depending on the version and model of the cabinet, one of the fol-
lowing drawer configurations will be standard.
DRAWER SET 1
REMOVAL
Open drawer completely. Roller clips will be in the down position.
Images 1 & 2.
While holding the sides of the drawer, use your finger to rotate the
clips upward. Image 3.
Lift drawer and remove from channel. Image 4.
INSTALLATION
Lower rear rollers into channel slots.
With the roller clips in the upward position, lower front rollers into
channel.
Make sure roller clips are in the down position.
1
2
3
4
