background image

1

TRUE

trcb

 – 

chef

 

base

 

equipment

www

.

truemfg

.

com

Loss or spoilage of products in your refrigerator/

freezer is not covered by warranty.  In addition to 

following recommended installation procedures 

you must run the refrigerator/freezer 24 hours 

prior to usage. 

NOTICE TO  CUSTOMER

WARNING:

  

Use this appliance for its intended purpose as described in this Owner Manual.  

How to Maintain Your True Refrigerator to Receive the Most Efficient and Successful Operation.

You have selected one of the finest commercial refrigeration units made. It is manufactured under strict quality controls with only the best 
quality materials available. Your TRUE cooler when properly maintained will give you many years of trouble-free service.

TO LOCATE REFRIGERANT TYPE, SEE SERIAL LABEL INSIDE CABINET.

  This cabinet may contain fluorinated greenhouse 

gas covered by the Kyoto Protocol (please refer to cabinet’s inner label for type and volume, GWP of 134a= 1,300. R404a= 3,800).

FOR HYDROCARBON REFRIGERATION ONLY (R-290) SEE BELOW:
• DANGER 

- Risk of fire or explosion. Flammable refrigerant used. Do not use mechanical devices to defrost refrigerator. Do not 

puncture refrigerant tubing.

• DANGER

 - Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel. Do not puncture 

refrigerant tubing. 

• CAUTION 

- Risk of fire or explosion. Flammable refrigerant used. Consult repair manual/owner’s guide before attempting to service 

this product. All safety precautions must be followed.

• CAUTION

 - Risk of fire or explosion. Dispose of properly in accordance with federal or local regulations. Flammable refrigerant used.

• CAUTION

 - Risk of fire or explosion due to puncture of refrigerant tubing; follow handling instructions carefully. Flammable refrigerant 

used.

• 

CAUTION

 - Keep clear of obstruction all ventilation openings in the appliance enclosure or in the structure for building-in.

SAFETY INFORMATION

SAFETY PRECAUTIONS 

When using electrical appliances, basic safety precautions should be 
followed, including the following:

•  This refrigerator must be properly installed and located in 

accordance with the Installation Instructions before it is used.

•  Do not allow children to climb, stand or hang on the shelves 

in the refrigerator. They could damage the refrigerator and 
seriously injure themselves.

•  Do not touch the cold surfaces in the freezer compartment 

when hands are damp or wet. Skin may stick to these 
extremely cold surfaces.

•  Do not store or use gasoline or other flammable vapors and 

liquids in the vicinity of this or any other appliance. Do not store 
explosive substances such as aerosol cans with a flammable 
propellant in this appliance.

•  Keep fingers out of the “pinch point” areas; clearances between 

the doors and between the doors and cabinet are necessarily 
small; be careful closing doors when children are in the area.

•  Unplug the refrigerator before cleaning and making repairs.
•  Setting temperature controls to the 0 position does not 

remove  power to the light circuit, perimeter heaters, or 
evaporator fans.

NOTE:

  

We strongly recommend that any servicing be preformed 

by a qualified technician.

Summary of Contents for TRCB-52


















Reviews: