background image

P-SOLO

OPERATION MANUAL

13

REGISTRATION and WARRANTY

Don’t forget to register your

P-SOLO

by filling out the enclosed Registration Card and

returning it to us. This allows

TRUE Systems

to contact you regarding any updates,

upgrades or applications information that may become available.

SUNRISE ENGINEERING and DESIGN INC. (“SUNRISE”) warrants the

TRUE

systems P-SOLO

to be free from defects in material and manufacture, when properly

installed and used according to instructions in the Operation Manual, for a period of one
year from the date of sale to the original purchaser. Units returned for warranty repair to
SUNRISE or an authorized

TRUE Systems

repair facility will be repaired or replaced

at the manufacturer’s option, free of charge. Supplementary shipping charges will apply
to units returned to addresses outside the continental USA. All units returned to
SUNRISE or authorized

TRUE systems

repair facility must be

prepaid

,

insured and

properly packaged

. Purchaser must obtain a Return Material Authorization (RMA)

number from SUNRISE prior to returning a product. SUNRISE may require proof of the
purchase date in the form of a copy of a dated original retail invoice.

This warranty is void if, in the sole judgment of SUNRISE, the product has been
abused, neglected, misapplied, or has been damaged by an accident, modification, or
attempted repair by unauthorized personnel. This warranty will not apply to cosmetic
damage incurred due to normal handling and use. SUNRISE reserves the right to
change or improve the product design at any time without prior notice. Incorporation of
design changes in future versions of the product does not imply the availability of
upgrades for existing units.

This warranty is in lieu of all other warranties, expressed or implied, and SUNRISE
specifically disclaims all implied warranties, including, but not limited to, warranties of
merchantability and fitness for a particular purpose. The purchaser acknowledges and
agrees that in no event shall SUNRISE be held liable for any special, indirect, incidental
or consequential damage, or for injury, loss or damage sustained by any person or
property, that may result from the use of, or failure of this product to operate correctly at
any time. In the USA, some states do not allow the exclusion or limitation of implied
warranties or liability for incidental or consequential damage, so the previous exclusion
may not apply to you. This warranty gives you specific legal rights, and you may have
other rights that vary from state to state.

SERVICE and SUPPORT INFORMATION

Registered users may obtain customer support by calling (520) 721-2735. Please
ask for Tech Support. You may also visit our website:

www.true-systems.com

or

email us at: [email protected].

Other than cleaning the exterior surfaces of your

P-SOLO

and occasional inspection

of the AC power cord and audio cables for damage, no maintenance procedures
should be attempted by the user. Exterior cleaning can be performed using a lint-
free cloth dampened with Windex

or equivalent.

Summary of Contents for P-SOLO















Reviews: