background image

 

3

 

 

8. A beep will sound when the cooking time has finished, and the appliance switches to standby mode.  

9. After cooking is completed, press the ON/OFF button again to turn off the unit. 

 

Notice: 

1. The power will completely shut off with 9 second if either (a) the wrong type of cookware is applied or (b) no 
cookware is placed on the unit.  
2. If the unit be used for 150 minutes under the TEMP or HEAT state, the LED display will show 

EE

 code and 

sound, then turn off automatically. 
3. The Max Timer is 150 minutes per operation.  

 

 

CLEANING  

 

 
 

z

 

Clean after each use. Turn Off, Disconnect plug from power source, and wait until unit has cooled down 

before cleaning. 

z

 

If the pots/pans are used without being cleaned, this may result in discoloration or stains. 

z

 

Do not use benzene, thinner, scrubbing brush or polishing powder to clean any surface on induction cooker. 

z

 

Wipe down the unit using a damp cloth 

z

 

When needed, use vacuum cleaner to remove dirt from the air intake and exhaust vent. Never insert any 

type of metal or iron wire into these two vents 

z

 

Never run water over the unit (If water gets inside it will damage & cause unit to malfunction.) 

 

WARNING: an authorized service representative should perform any servicing 

 

 

TROUBLE SHOOTING 

 
If LED-display shows the error code, please reference to the solution as following 

Error Code 

Cause and Solution 

“---“ and the unit sounds 
“Dee, Dee, …”

 

There is no cookware or no suitable cookware on the stove. 
The power will completely shut off with 9 second if it is no 
cookware or wrong type of cookware placed on the unit. 

E01 

Voltage is under 160V 

E02 

Voltage is over 270V 

E03 

The accessory and spare parts are damaged, please contact 
the nearest authorized service facility for trouble shooting, 
repair and adjustment. 

E04 

The accessory and spare parts are damaged, please contact 
the nearest authorized service facility for trouble shooting, 
repair and adjustment. 

E05 

The cooking temperature exceed 

300

.If you use the function 

mode “POWER” to cook, the max temperature is 

300

.If the 

cooking temperature exceeds 

300

, the device shows an error 

code. Please power off to eliminate the wrong record and let 
the appliance cool down. Then plug the power cord again and 
restart. If you would like the cooking temperature exceed 

300

please use the function mode “TEMP”, the max temperature is 

450

E06 

The accessory and spare parts are damaged, please contact 
the nearest authorized service facility for trouble shooting, 
repair and adjustment. 

E07 

The cooking temperature exceeds

 450

 while using the 

function mode “TEMP“. After the device has cooled down, the 
appliance will automatically enter standby mode. 

E08 

You are using unsuitable cookware. Please use the suitable 
cookware (with the flat base). Power off to eliminate the wrong 
record, plug in the power cord again and restart. 

 

Reviews: