11052019
17
Your new True North Treestands Inc. treestand is factory finished with a powder coating that guarantees years of trouble-free service. It is recom-
mended that you store your treestand out of direct sunlight and out of any other harsh environmental condition(s) that may adversely affect its
performance.
IMPORTANT WARRANTY INFORMATION
True North Treestands Inc., extends the following limited warranty for the TNT line of treestand products, bought from an authorized dealer (as published
on the company website) pursuant to an authorized sale. The limited warranty is provided for the period of one year, from the date of purchase from an
authorized dealer. The warranty is limited to products that have defect(s) in material and workmanship that arise under proper use and storage of the product.
Proof of purchase from an authorized dealer plus the return of your warranty application card to our home office, address provided below, is required for all
warranty claims. In the event this product is found to be defective within the warranty period, True North Treestands Inc., at its own discretion, shall have as
only obligation and your exclusive remedy, to replace or repair of any defective parts. To obtain warranty service, please contact True North Treestands Inc.,
at (855) 486-8868 (HUNT TNT). Exclusions to this warranty include unauthorized sales and defects in seat, paint, plastics, webbing and/or defects caused
by operator misuse and/or abuse. Limitation of liability include the forgoing warranty is made in lieu of all other warranties, express or implied and True
North Treestands Inc. disclaims any implied warranty of merchantability and fitness for particular purpose.
CARE AND MAINTENANCE/WARRANTY
STEP 2: While safely standing on your climbing system (i.e.,
climbing
sticks, ladders, sectionals, etc.), which meets or exceeds industry standards recognized by the
TMA, at treestand installation height, re-check to ensure your lineman belt is properly secured to you and the tree.
STEP 3: Re-install the Hoist as previously outlined and shown in Figure 27. Ratchet the assembly tight. Make certain the assembly is installed a minimum of 30-inches
(76 cm) above the Quick Hitch Receiver as shown in Figure 28. Fold the standing platform
up
tight to the seats
. Install the hoist rope onto the treestand
assembly as shown in Figure 29
.
STEP 4: With the treestand assembly attached to the hoist rope, remove the Upright Ratchet Strap. Next, remove the Standing Platform Ratchet Strap.
STEP 5: Have the other adult, on the ground, GENTLY put tension on the hoist rope, lifting the treestand just far enough to lift it out of the Quick Hitch Receiver. With
the treestand assembly out of the Quick Hitch Receiver, AND TENSION STILL ON THE HOIST ROPE, disengage the hoist lever. With the hoist disengaged, have the other
adult lower the treestand assembly to the ground below.
STEP 6: With the treestand assembly safely on the ground, climb down to ground level using your lineman belt.