11052019
11
TRUE NORTH TREESTANDS MENTOR ASSEMBLY
Figure 16
Components of the True North Treestand TNT Mentor w/ Quick Hitch Hardware Pack
(Not shown to scale)
Prior to installing your True North Treestands Inc. Mentor treestand, some minor assembly is required.
STEP 1: Locate the adjustable
leveling stem
and the adjustable
leveling stem
locking pin. Insert the adjustable
leveling stem
into the adjustable
leveling
stem
receiver as shown in Figure 17. Lock in place using the adjustable
leveling stem
locking pin as shown in Figure 18. NOTE: You will adjust this
stem
in
and out to adjust the angle of the standing platform during treestand installation.
STEP 2: NOTE: This shoulder strap installation is optional. Locate the two (2) shoulder straps. Install the shoulder straps onto the standing platform as
shown in Figure 19.
STEP 3: NOTE: This adjustment of the seat fabric tension is optional. Locate the provided Allen wrench. Adjust the tension of the seat fabric by loosening or
tightening the Allen bolt located on the end of the seating platform bar as shown in Figure 20.
A (4) 5/16” x 2” w/ (2) nylon washers & (1) 3/16” spacer and locknut
B (4) 5/16” x 2 1/4” w/ (2) nylon washers
A
B
Figure 20
Adjust Seat Fabric Tension
Figure 19
Install Shoulder Straps
Figure 18
Secure Adjustable
Leveling Stem
w/ Adjustable
Leveling Stem
Locking Pin
Figure 17
Install Adjustable
Leveling Stem
Into
Receiver