Installation Options
•
Solid Fuel burning fireplace
• Certified Wood Burning, Factory Built Fireplace
•
Thermostat or manual operation
•
Outside Air Compatible
Selecting a Location:
This appliance must be installed in a wood burning fireplace with an adequate load bearing capacity, if
existing construction doesn’t meet load capacity, suitable measures (e.g. load distributing plate) must be
taken to achieve it.
Due to high temperatures, the stove should be located away from furniture and draperies.
The layout of your house and the location of the Pellet Stove will determine how effective it is at heating the
intended area. Pellet Stoves use mainly air circulation to disperse their heat, therefore a central location with
good airflow will work the best. Try to locate the heater in the area you want heated.
Caution:
DO NOT CONNECT TO OR USE IN CONJUNCTION WITH ANY AIR DISTRIBUTION DUCT WORK. THIS UNIT IS
NOT APPROVED FOR SUCH INSTALLATIONS.
Stove Dimensions
Weight - 300 pounds (140 Kg.)
Hopper Capacity - up to 60pounds (28 Kg.) Results will vary based on fuel density.
31"
42"
[1.07m]
26 1/2"
[610mm]
15-1/2 "
[394mm]
9 5/8"
[245mm]
23 1/2"
[622mm]
21"
[535mm]
15-1/2"
[395mm]
28 1/2"
[725mm]
**34"
[865mm]
**48"
[1.22m]
[790mm]
** OVERSIZED SURROUND
Figure 9: TN40.INSA DIMS.
Installer Information
17
5055.538-A_080317-28
TN40 INS
