During operations, if any errors occurred, please check the following table before calling
for service. Below are common errors and the checks to perform.
VI. Troubleshooting
Potential Solution
Problem
No operation during
the heating being in use.
Is the air intake/exhaust
vent clogged or dirt
has accumulated?
Clean the vent area and please
keep a minimum distance of 2 to 4
inches from the unit to the walls
or other barriers.
Check Points
Do not remove cookware
while in use.
Is the cookware being heated,
but continually being removed?
Place the cookware at the center
of the defined heating zone.
Is the cookware not
placed in the center of
the heating zone?
Heating being interrupted in
normal use and a “Beep”
will be heard.
Incompatible cookware or no
cookware is used?
Replace compatible cookware
for the induction cooker.
Is the fuse blown out?
Is the unit properly
connceted to the outlet?
After connecting the power &
pressing the “power” key, the
appliance has no response.
Check the fuse using a volt meter
Check to insure the plug is
connected firmly to the unit and
the outlet is reciving power.
