Rev C, October 7, 2016
8
Manual Number 9018670
3.3.2 Pin Assignment Information
Positive DC input
– (11 -18 VDC). Connect pin A to aircraft positive 14 VDC bus.
(25 Amp circuit breaker recommended)
DC Output
– Connect pin C as the positive 28V DC output voltage.
DC Return
– Connect pin B to input power return or aircraft ground.
Enable –
6430234-1: Not available
6430234-2: Pin D to be grounded to enable power output
(via switch or other means. See section 4.2.1 and figure 3.6 for related details)
Figure 3.3
Table 3.3
Pinout View of 6430234-1 Unit Connector
6430234-1 Connector Pinout
Figure 3.4
Table 3.4
Pinout View of 6430234-2 Unit Connector
6430234-2 Connector Pinout
3.3.3 Harness
Verification
With the TC230 Static Converter disconnected, activate the aircraft power bus that supplies
the unit and use a multi-meter to verify that aircraft power and ground with appropriate
voltage is on the pins within the mating harness.
Connector Pinout
A
DC Power Input
B
DC Power Return
C
DC Power Output
Connector Pinout
A
DC Power Input
B
DC Power Return
C
DC Power Output
D Remote
ON/OFF
