EN
10
5.
Connect one end of the
EZ Twist
TUBING
to the fitting on the bottom of the nebulizer and the other end to the
AIR
OUTLET
on the compressor. Ensure both ends are securely engaged. The Nebulizer may then be placed in the
CUP
HOLDER
on the compressor until you are ready to start your treatment as shown in Figure 9.
6.
In a relaxed, comfortably seated position, pick the nebulizer up out of the
CUP HOLDER
. Switch on the compressor
and start your treatment.
7.
When your treatment is complete or during a rest in your treatment, the nebulizer may be placed back in the
CUP
HOLDER
and the compressor switched off.
NOTE:
The compressor should be unplugged when not in use.
FIGURE 9
CLEANING AND MAINTENANCE
AIR FILTER
Your
Ombra
* Portable Compressor is equipped with a special air filter that will slowly change colour with use. The
original filter is bright white, but it will slowly turn grey with use. Your air filter should be changed every 30 days, or as
visual inspection indicates. The compressor should never be used without an air filter installed.
To change the filter (Figure 10)
1.
Pull back the
AIR FILTER COVER
and remove the old filter from the compressor.
2.
Dispose of the old filter.
3.
Insert a new filter, then replace
FILTER COVER
.
CAUTION:
Do not wash or reuse the filter. Use only
Ombra
* Replacement Filters (Part Number: 105544-001). Do
not attempt to substitute any other material to act as a filter as this will result in damage to the compressor.
FIGURE 10
