MULTIPLE TRANSMITTERS:
For best results when connecting a system with multiple transmitters, only power on a single trans-
mitter at a time while pairing. Power on a transmitter and pair all of the receivers, then power the
transmitter off and move to the next transmitter and receivers. When finished pairing, power on all of
the transmitters. Note that this process is necessary because when first powering on a receiver, the
device tries to auto connecting to a transmitter. This behavior makes connecting multiple receivers
to a transmitter a breeze.
W-TX / W-RX
User Manual
WIRELESS SUB EXTENDERS
PAIRING INSTRUCTIONS:
1. On the W-RX receiver, connect the Sub Out output to the LFE/mono input on a sub amplifier.
2. On the W-TX transmitter, connect an audio source to the Audio In RCA jack. For LFE/mono
signals use the L channel of the RCA jack.
3. Plug in the power supplies to the wall outlet, but wait to apply power.
4. On the W-RX receiver, power the device by applying the 5.9v DC In.
5. Press the Pair button on the W-RX.
6. Within 10 seconds of pressing pair on the receiver, power on the W-TX transmitter by applying
the 5.9v DC In. Note: During the boot up process, the W-TX searches for the W-RX in pair mode
and connects automatically.
7. The LED indicator light will flash while not connected. Once the LED stops flashing and turns
solid then the connection is complete.
8. If the pairing fails, step through the trouble shooting steps of this guide.
Pairing with SLIM-PWR44:
1. On the W-RX receiver, connect the Sub Out LFE output to the LFE input on a sub amplifier and
apply power.
2. Make sure the SLIM-PWR44 is turned off.
3. On the W-RX receiver press the Pair button.
4. Within 10 seconds, turn on the SLIM-PWR44. Note: During the boot up process, the
SLIM-PWR44 searches for the W-RX in pair mode and connects automatically.
5. The LED status indicator on the W-RX will blink for several seconds while connecting and then
show solid green when connected.
6. If connection fails, step through the trouble shooting steps of this guide.
DC In
5.9v
For pairing with the W-TX:
Ensure the power to the
SLIM-PWR44 is off before
pushing pair on W-RX.
D
O
SOURCE
A
ON / STANDBY
BLUETOOTH
RELEASE
Sub Out
Pair
DC In
5.9v
