W-TX / W-RX
User Manual
WIRELESS SUB EXTENDERS
MOUNTING TO SUBWOOFER:
Each W-TX and W-RX comes with an included bracket for mounting to a sub, flat surface, or other
installation scenarios. Follow these steps to install a receiver to the back of a sub.
Step 1:
Remove two screws that mount the sub amp to the cabi-
net. Install the bracket by inserting the screws through
bracket and back into the original holes. The W-RX brack-
et has slots that will work with a wide range of hole pat-
terns. We recommend you use two screws in near a corner
away from the electrical components. For most TruAudio
subs this will be in the lower left corner, your install may
vary..
Step 2:
Attach the W-RX to the bracket with a firm press. The unit
will snap into place. Use an RCA cable and the provided
power cable to complete the install.
