background image

Inspection report and safety check

TRU-TURF Pty. Ltd. Unit 2, 56 Export Drive, Molendinar, Queensland 4214 Australia

T: +61 7 5594 7199 F: +61 7 5571 5493 E: [email protected] W: www.truturf.com

WARRANTY REGISTRATION FORM AND INSPECTION REPORT

Any units not registered with Tru-Turf Pty. Ltd. are not eligible for warranty claims. This form must be fi lled out 
by the dealer and signed by both the dealer and the customer at the time of delivery. Please email, fax or mail a 
signed and dated copy of the completed form to Tru-Turf Pty. Ltd. (see details on bottom of page).

Dealer’s Name:

Address:

City, State:

Zip Code, Country:

Email Address:

Customer’s Name:

Address:

City, State:

Zip Code, Country:

Email Address:

Telephone Number:

Model:                                         Serial Number:                                                    Delivery Date:

Red Cap on Oil Tank has been removed and replaced by the 
Black Breather Cap.

Transmission Oil checked at correct level.

Engine Oil checked at correct level.

Tire pressures checked to a maximum 18psi (124kPa).

Drive Chain lubricated with a water-displacing solvent (WD40, 
CRC etc.).

Drive Chain tension is correct.

Nuts, Bolts, Grub Screws are tightened.

Bearings have been lubricated and rotate freely.

Please mark when completed:

Sprockets for Transmission and Drive Roller are tight.

Trailer Arm Pivot Bushes have been greased.

“Important Notice” regarding the correct oils to be used in 
the Transmission has been read and complied with.

All Safety Decals have been installed and are legible.
Operating and Safety Instructions have been read and 
understood.

Transmission Guard is in place and secured.

Seat, Joystick, Trailer Arms, Dampener Struts, Drawbar, 
Wheels and Tires are correctly assembled, installed and 
secured.

I have thoroughly instructed the buyer on the above described equipment which review the Operator’s Manual 
content, equipment care, adjustments, safe operation and applicable warranty policy.

Dealer’s Rep. Name:                                                Signature:                                                      Date:

The above equipment and Operator’s Manual have been received by me and I have been thoroughly instructed 
as to care, adjustments, safe operation and applicable warranty policy.

Customer’s Name:                                                   Signature:                                                      Date:

SAMPLE 

ONLY

Summary of Contents for GR11000D


















































Reviews: