Tru-Turf GR11000D, Manual

Page: 14 / 49

TRU-TURF GR11000 D Golf Greens Roller Manual 11
• Lubricate rod ends
Service of smoothing roller bearings
• Whilst the Roller is suspended by the Trailer, check
operational smoothness of the bearings fi tted to each
smoothing roller by rotating the rollers by hand. If
bearing tightness, roughness or excessive looseness is
detected, replace the faulty bearings.
• If bearings are faulty
(a) Remove the complete smoothing head from the
machine, undo the four bearing mount bolts on
upper body and steering rod, wheel the roller away
until the total head is exposed to work on.
(b) Remove roller shaft bolts from end of the head,
remove rollers from the heads.
(c) Fit new bearings, replace rollers into the heads,
lubricate shaft bolts with an anti seize compound
before installing them. Tighten securely and ensure
rollers rotate freely when fully tightened.
(d) If the steering rod is removed or the length is
altered ensure it is correctly adjusted so that the
head is parallel to the body when in the straight
ahead position and the joystick is aligned with the
centre of the seat. Adjust if necessary.
Engine oil (Honda)
• Check engine oil level prior to daily operation. Top up
as required.
• Change oil per manufacturers (Honda) handbook
recommended schedule.
• Use only manufacturers (Honda) handbook
recommended oils.
• Refer to service chart on this page for additional
information.
Description Pre-Delivery Pre-Operating 12 Monthly
Check Engine oil
√ √
Check Transmission Oil Level
√ √
Beware of contaminants entering the transmission
√
√
Lubricate drive chain with WD40 or equivalent
√
√
Check Tires Max 18 P.S.I.
√
√
Check Gas
√
√
Check Smoothing Roller Bearing
√
√
Check Drive Roller Bearings
√
√
Check for loose Nuts and Bolts
√
√
Renew Engine Oil as per manufacturers Handbook
Renew Transmission Oil - See page 1 for correct oil every 500hrs or...
√
Renew Transmission Oil Filter
* √
Renew Smoothing Roller Bearings
* √
Renew Drive Roller Bearings
* √
Renew Chain Tensioner Sprocket Bearings
* √
Renew Drive Chain
* √
Replace Foot Pedal Struts
*
Replace Trailer Strut
*
Changing transmission oil
Ongoing Maintenance, Lubricant and Replacement
Schedule (below)
Note. Areas indicated with an aterix (*) need to be
changed when defective or as required. This may be
before the recommended replacement schedule. Please
replace all parts as necessary.
MAINTENANCE
We use and recommend Penrite Synthetic 5 SAE
5W-60. Available through our dealer network.