background image

13

www.truturf.com

BH40/60  Owners Manual

•  Make sure the roller is serviceable before rolling.
•  Start rolling from the fringe of the green.
•   Pick a point on the other side of the green to 

roll to.

•    Do not look at the green close to the roller; it 

makes it di

  cult to steer the roller straight; look 

well ahead.

•    Use 3/4 throttle until you are pro

fi

 cient at 

operating the roller.

•    Once you choose your rolling line hold the steering 

wheel steady, correcting direction gently as 
required.

•    Move the steering wheel a little at a time to change 

direction; excessive movement of the steering 
wheel makes it di

  cult to maintain a straight line.

•  Roll in straight lines.
•    Move o

  the green when rolling is complete before 

putting the trailer in the down position.

•    If for some reason the machine stops on a green, 

use the handle mounted on the frame to pump 

Points to Remember 

the trailer down to its towing position. Wheel 
the machine o

  the green. Tow it back to the 

workshop for recti

fi

 cation, once running again the 

trailer can be raised or lowered electronically. 

Summary of Contents for BH40










































Reviews: