13
5
6B
6A
Step 2- Leg Support Assembly
At this point, two people will be needed to assemble the trampoline.
Ø
Connect the Vertical Leg Extensions (#6A and #6B) to the Leg Base (#5). Secure using Screws (#B) and
Arc Washer (#A) and tighten using Allen Wrench (#C) as shown below (the assembled parts will be
hereinafter referred to as “Leg Support”). Repeat this step for all the Leg Supports.
Ø
Lift two sets of the assembled Leg Supports to a vertical (standing) position. Connect one end of Top Rail
with Leg Socket (#3) to Vertical Leg Extension (#6A) and the other side to Vertical Leg Extension with
Indented Hole (#6B) as shown below. Repeat in the same manner to assemble all Leg Supports.
Hint:
Make sure the larger indented hole
on Vertical Leg Extension (#6B) is facing outward. This is important
for installing the enclosure late.
DO NOT PLACE HANDS NEAR
THE OPENING WHEN
CONNECTING THE TUBES.
WEAR PROTECTIVE GLOVES
TO PROTECT FROM INJURIES
DURING ASSEMBLY.
Vertical Leg Extension with
Indented Hole
