31
FIRST RIDE
After the rider understands the controls and is comfortable with them, it’s time for
the first ride. For this, the rider must be dressed correctly in suitable safety gear.
Boots, gloves, a helmet and eye protection are necessary.
The venue must be flat, open and safe, with no obstacles of any kind. The machine
must be set up correctly, with the speed set to its lower setting and the throttle
response set to its lowest.
1.
Ensure the power is turned off.
2.
While an adult supports the bike, the rider can get on.
3.
The rider now can reach back with their left foot, and put the side-stand to the up
position. Have an adult ready to hold the bike up for this!
4.
Encourage the rider to rock the machine from side to side and forward and back,
in order to get comfortable with the weight of the bike.
5.
The rider can now switch the machine on.
6.
Before turning the throttle, the rider’s legs can be splayed forward and out like
outriggers.
7
. The rider can now twist the throttle (as slowly as possible) and go. Encourage
them to go and stop, go and stop… using the brakes to stop. Have a supportive hand
on the rear fender whenever possible.
8.
Once comfortable, the rider can try to ride along and lift their feet onto the pegs
as they go.
¡ATTENTION!
OFF ROAD USE ONLY!
ON-E
are designed for off road use only and must not be used on public roads or
sidewalks. Please check and obey all local laws.
If the rider drops the bike, ensure that the power is turned OFF before lifting the
bike. It is good practice to turn the power off whenever there is no rider on the
bike..
¡CAUTION!
9.
When stopped, turn the power off.
Summary of Contents for ONE RR 2020
Page 2: ...2...
