14
DIAL ADJUSTMENT
This dial is to be adjusted by a responsible adult only.
The motorcycle is equipped with 4 positions rotary dial, which allows the power,
speed and response of the gas to be varied depending on the skill of the rider, as
well as the terrain conditions. The switch is located inside the chassis, under the
seat. The configurations are pre-configured in the factory with these characteristics:
Map position:
1. Beginner:
A docile response, with reduced speed and low power. Ideal for beginner
riders, as well as recommended to take the first contact with the motorcycle.
2. Interzone:
Intermediate response, speed and average power. Ideal for interzone
and medium level areas.
3. Medium:
Fast response, speed and average power. Multi-purpose configuration
For slippery areas, with medium / high pilot level.
4. Racing:
Fast response, speed and high power. Recommended use for experienced
pilots.
To change the map, it is necessary to follow this steps:
1.
Turn off the motorcycle with the (ON / OFF) switch.
2.
Change the position adjuster, choosing between: 1, 2, 3 or 4. In the clockwise
direction the position increases. Being 1 counterclockwise and 4 clockwise the
position.
3.
Turn ON the motorcycle with the (ON / OFF) switch.
- This operation should be carried out by an adult who knows the pilot’s ability and
the terrain conditions.
- Take into account, during the time of turning OFF and ON the motorcycle, should
be minimum of 5 seconds. Otherwise, the map change won’t be performed correct-
ly or the controller can be locked. In this case, turn OFF the motorcycle and wait 5
seconds and turn ON again.
-Prolonged use of position 3 and 4 reduces autonomy significantly with respect to
position 1 and 2.
NOTE
A
A) Dial adjuster, as we turn clockwise, the motorcycle response will increase, the
same happen with speed and the power will be higher.
A
Summary of Contents for ONE RR 2020
Page 2: ...2...
