TRQ SS1232 Installation Instructions Download Page 1

Page: 1 / 4

Toyota Highlander Installation Instructions

Part #: SS1232

Fits: 2014 - 2016

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.

READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.

**DO NOT OVER TORQUE. STANDARD OPERATING LOAD FOR TIGHTEN BODY MOUNT NUTS & BOLTS VARIES FROM 45 TO 65 FOOT POUND.

PARTS LIST

Qty

Part Description

Qty

Part Description

Driver / Left Running Board

8mm x 19mm Hex Bolts

Passenger / Right Running Board

5mm x 20mm Hex Bolts

Front Mounting Bracket Arms

6mm x 30mm Hex Bolts

Rear Mounting Bracket Arms

5mm Black Screws

Middle Mounting Bracket Arms

6mm Bolt Nuts

8mm x 15mm x 60mm T-Bolts

8mm Bolt Nuts

8mm T-Slot Nuts

6mm Flat Washers

6mm Black Latches

8mm Flat Washers

8mm Lock Washers

6mm Lock Washers

Summary of Contents for SS1232

Page 1: ...5 FOOT POUND PARTS LIST Qty Part Description Qty Part Description 1 Driver Left Running Board 6 8mm x 19mm Hex Bolts 1 Passenger Right Running Board 10 5mm x 20mm Hex Bolts 2 Front Mounting Bracket Ar...

Page 2: ...y to the rear and ensure that the hex bolts are loose and not fully tightened Please make sure that you do not fully tighten the bolts until the last step Figure 2 Front Bracket Figure 3 Middle Bracke...

Page 3: ...d rear brackets b Middle Bracket B This one is for the Passenger s Side and will require you to use the original bolts nut and screws that came with the vehicle If not then you will have to purchase t...

Page 4: ...hers and 6mm Lock Washers for each side These will be used to tighten the bracket in place to prevent it from moving about Figure 10 Rear Bracket locked into place with Latches 11 For the last step en...