11/29/2013
2
WARNING
Make sure that there is no exposed wire or strands that
could cause a dangerous short circuit !
5. Connect the black fixture lead to the black wire in the outlet box.
Fasten the joined wires as in step 4
.
6. To prevent water from flowing into the outlet box put a bead of weatherproof
caulking or silicone sealant around the inside edge of the back.
DO NOT PLUG THE DRAIN HOLE !
7. Using the half balls and sealing washers, fasten the fixture to the outlet box
8
.
remove the lock ball
,
Remove the bottom screws from the cage .
Remove the cage from the roof.
9
. Install the candle cover and lamps ( light bulbs).
NOTE: This fixture is rated for 60 watt type B, BA, C or CA lamps.
WARNING
DO NOT EXCEED RECOMMENDED WATTAGE!
10. Place the glass into the cage.
11. Carefully reassemble the cage to the roof .
12. place thebottom cover and decorative part. With the lock ball
13. Restore power to circuit at breaker or fuse box
electrical tape
approved fastener
(wire nut)
Candle cover
Lamp
Roof
Glass
Cage
Bottom cover
Lock ball
Deorative part
Back plate
Half ball
Ground screw
Mountng ring
Nipple
Bottom screw
