Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
8
2
2
Rod (2.5x300mm)
TP Screw (2.3x12mm)
Servo tray(70x58x2mm)
Pivot&round hinge(4.5X67mm)
6
Install the aileron servo to the servo mount as illustration
below.
Install the control horn and connect the linkage.
Make sure hinges are
mounted in the same line.
1mm
Trailing
edge
Cut away the rubber tube when
the epoxy glue dried.
Make sure they are in
the right position while
installing.
Aileron
Collar (2.5mm)
2
2
2
2
2
2
Screw (3x15mm)
Nut (3mm )
Clevis
Aluminum Washer (3x8mm )
Nut
Clevis
Washer 3x8mm
Screw 3x15mm
Collar
Control horn
6
pivot & round hinges(4.5x67mm)
Apply instant type AB glue to appropriate position in the
trailing edge and assemble the ailerons to them.
Apply instant type AB glue to appropriate position of the aileron and
pivot & round hinges. Insert the pivot & round hinges to the ailerons.
Keep about 1mm width space between the aileron and
the trailing edge.
Accessory list for the coming installation steps.
1
2
3
4
5
1
10
2
TP Screw (2.3x8mm)
Wooden stick
40mm
40mm
AILERON
Adjustment of the aileron and flap,be sure they can work
perfectly.
AILERON
AILERON
50mm
50mm
Top view
RUDDER
Side View
Adjustment of the rudder, be sure it can work perfectly.
.Assemble the door window with instant style glue.
Trim the surplus parts of the windshield and assemble it
to the fuselage with screws.
Top view
Position for
right diagram.
ELEVATOR
40mm
40mm
Adjustment of the elevator,be sure it can work perfectly.
100mm
100mm
Centre of the Gravity.
2.3mm
Place the wood sheet
before fix the PVC.
61
62
59
63
64
12
60
