6
Pin hinge(24x24mm)
TP Screw (2.3x12mm)
1.5mm
4mm
Securely glue together. If coming off during flighs, you 'll
lose control of your airplane which leads to accidents!
Install the servo.
Secure the servo.Install the nylon control horn
and connect the linkage.
Apply instant type CA glue to flap and pin hinges.
Assemble the flap to main wing with instant type CA glue. Be careful
to ensure the moving parts of the hinges are able to move freely.
Rod (2.5x300mm)
Clevis
Clevis
Lock Nut (4mm )
Screw (3x10mm)
Nut (3mm )
Screw (4x40mm)
Washer
Washer(4x14mm)
Flap
1mm
Make sure they are in
the right position while
installing.
Trailing
edge
Keep some space about 1mm width between
trailing edge and flap.
6
Pin hinge(24x24mm)
8
2
2
2
4
2
2
2
Clevis
Clevis
Rod (2.5x300mm)
TP Screw (2.3x12mm)
Wooden Block(20x20x8mm)
Servo tray(68.5x56.5x2mm)
Screw (4x35mm)
2
Washer
Lock Nut (4mm )
2
Washer(4x14mm)
2
Collar (3mm)
7
6
8
9
10
2
Accessory list for the coming installation steps.
20mm
20mm
30mm
AILERON
FLAP
AILERON
Side View
Adjustment.
The centre of the Gravity.
FLAP
155mm
White sticker for servo tray(16x800mm)
1
Cut and stick the white stripe stickers to relevant position on the wheel pants,bottom covers to match the model well.
79
80
78
15
