2.5mm
Make sure hinges are
mounted in the same line.
1mm
Rudder
Tailing
edge
Cut away the rubber tube when
the epoxy glue dried.
Make sure they are in
the right position while
installing.
Epoxy the fibreglass tubes to appropriate position as
below and leave some space with width of 1mm between
tailing edge and rudder.
30mm
65mm
95mm
Pin hinge(4.7x70mm) 3
2
Steel wire (0.5x3000mm)
2
2
2
Clevis
Washer(3x15mm)
Lock Nut (3mm )
1
Screw (3x80mm)
2
Copper joiner
Washer(3x15mm)
Screw (3x80mm)
Lock Nut (3mm )
Clevis
Aluminum tube
Steel wire
The sketch map after the rudder shaft assemble finished.
35mm
3mm
The sketch map of the linkage for the rudder
and the tail wheel.
Drill holes to the relevant position in the tailing edge
and epoxy the rudder to them.
Drill holes to appropriate position in the rudder and epoxy
the ping hinges in them
Drill a hole to the appropriate position through
the rudder as illustration.
40
38
39
41
42
43
8
Note:rubber wheels oleo struts
and retracts are optional.
Wheel (45mm)
Lock Nut (3mm )
Lock Nut (3mm )
Steel wire (0.5x3000mm)
Steel wire (0.5x3000mm)
Bushing (4X4mm)
Bushing (4X4mm)
Screw (3x50mm)
Screw (4x25mm)
Washer (4x12mm)
2
Screw (4x25mm)(Not included)
2
Washer (4x12mm)(Not included)
22mm
5.2mm
Blind Nut
Screw (4x25mm)
Washer (4x12mm)
2
Screw (4x25mm)(Not included)
2
Washer (4x12mm)(Not included)
Blind Nut (4mm)(Not included)2
Wire for elevator servo
Wire for rudder servo
Wires for tail wheel
2
Steel wire (0.5x3000mm)
Blind Nut
4
4
Clevis
Copper joiner
4
4
Screw (2x10mm)
Nut (2mm )
4
Washer(2x5mm)
Steel wire
Copper joiner
Lock Nut (2mm )
Screw (2x10mm)
Ball joint
Washer(2x5mm)
Install the servo.
Assemble the tail wheel to the tail retract.
Fix the tail oleo strut mount to the appointed position
with screw as illustration.
Find out the proper position and set blind nut in them,
using screw to fix the tail wheel arm as illustration.
Assemble the servos for the rudder and tail wheel to
appropriate position in the fuselage.
The scatch map of the servo wires position inside
the fuselage.
45
46
47
48
49
9
44
