![background image](http://html1.mh-extra.com/html/troy-bilt/v809h/v809h_operators-manual_1173076011.webp)
11
Throttle Control Lever
The throttle control lever is located on the right side of
the tractor’s dash panel. This lever controls the speed
of the engine. When set in a given position, the throttle
will maintain a uniform engine speed. See Figure 5.
Figure 5
IMPORTANT:
When operating the tractor with the cutting
deck engaged, be certain that the throttle lever is
always
in the FAST (rabbit) position.
Choke Control
The choke control can be found
on the left side of the dash panel
and is activated by pulling the
knob outward. Activating the
choke control closes the choke
plate on the carburetor and aids
in starting the engine. Refer to
Starting The Engine
on page 14 of
this manual for detailed starting
instructions.
Brake Pedal
The brake pedal is located on the
right front side of the tractor
above the drive pedal along the
running board. The brake pedal
can be used for sudden stops or
setting the parking brake.
NOTE:
The brake pedal must
be fully depressed to activate the
safety interlock switch when
starting the tractor
.
Ignition Switch
WARNING:
Never leave a running
machine unattended. Always disengage PTO,
move shift lever into neutral position, set
parking brake, stop engine and remove key to
prevent unintended starting.
To start the engine, insert the key into the ignition
switch and turn clockwise to the
START
position.
Release the key into the
ON
position once engine has
fired. See Figure 6.
Figure 6
Refer to
Starting The Engine
on page 14 of this manual for
detailed starting instructions
The ignition switch is also used to operate the tractor’s
headlights. Refer to
Operating The Headlights
on page 16
of this manual for detailed instructions.
Drive Pedal
The drive pedal is located below
the brake pedal on the right front
side of the tractor along the
running board. Depress the drive
pedal with your right foot when
the tractor shift lever is in either
FORWARD or REVERSE to
cause the tractor to move.
Ground speed is also controlled
with the drive pedal. The further
down the pedal is depressed, the faster the tractor will
travel. The pedal will return to its original position when
it’s not depressed.
IMPORTANT:
Always set the parking brake when
leaving the tractor unattended.
Slow
Fast
Position
Position
Off
On/Lights
On
Start