background image

Customer Support

Please do NOT return the machine to the retailer or dealer without first contacting the Customer Support Department.

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of 
this machine, you can seek help from the experts. Choose from the options below:

Visit us on the web at www.troybilt.com

◊ 

Call a Customer Support Representative at (800) 828-5500 or (330) 558-7220

◊ 

Write us at Troy-Bilt LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019

◊ 

Thank you for purchasing a Lawn Mower manufactured by 
Troy-Bilt.  It was carefully engineered to provide excellent 
performance when properly operated and maintained. 

Please read this entire manual prior to operating the equipment.  

It instructs you how to safely and easily set up, operate and 

maintain your machine.  Please be sure that you, and any other 

persons who will operate the machine, carefully follow the 
recommended safety practices at all times.  Failure to do so could 
result in personal injury or property damage. 
All information in this manual is relative to the most recent 
product information available at the time of printing.  Review 
this manual frequently to familiarize yourself with the machine, 

its features and operation.  Please be aware that this Operator’s 

Manual may cover a range of product specifications for various 
models. Characteristics and features discussed and/or illustrated 
in this manual may not be applicable to all models. We reserve 

the right to change product specifications, designs and 
equipment without notice and without incurring obligation.
If you have any problems or questions concerning the machine, 
phone an authorized Troy-Bilt service dealer or contact us 

directly.  Troy-Bilt’s Customer Support telephone numbers, 

website address and mailing address can be found on this page. 
We want to ensure your complete satisfaction at all times.
Throughout this manual, all references to 

right

 and 

left

 side of the 

machine  are observed from the operating position
The engine manufacturer is responsible for all engine-related 
issues with regards to performance, power-rating, specifications, 

warranty and service. Please refer to the engine manufacturer’s 
Owner’s/Operator’s Manual, packed separately with your 

machine, for more information.

Thank You

Record Product Information

Before setting up and operating your new equipment, please 
locate the model plate on the equipment and record the 
information in the provided area to the right. You can locate the 

model plate by standing at the operator’s position and looking 

down at the rear of the deck. This information will be necessary, 
should you seek technical support via our web site, Customer 
Support Department, or with a local authorized service dealer.

M

Odel

 n

uMber

s

erial

 n

uMber

To The Owner

1

2

Safe Operation Practices ........................................ 3
Assembly & Set-Up .................................................. 9
Controls & Features ................................................13
Operation ................................................................14
Maintenance  & Adjustment .................................16

Service .....................................................................18
Troubleshooting .................................................... 20
Replacement Parts .................................................21
Warranty ................................................................ 22
Spanish ................................................................... 23

Table of Contents

Summary of Contents for TB330













































Reviews: