![background image](http://html1.mh-extra.com/html/troy-bilt/tb30r/tb30r_operators-manual_1173057016.webp)
Throttle/Choke Control
The throttle control lever is located on the left
fender of the tractor seated in the operator’s
position; see Figure 4-1. This lever controls the speed
of the engine, as well as the choke when it is pushed
all the way forward. When set in a given position,
the throttle will maintain a uniform engine speed.
IMPORTANT:
When operating the tractor with the
cutting deck engaged, be certain that the throttle
lever is always in the FAST (rabbit) position.
Moving the throttle lever all the way forward
activates the engine’s choke control. Activating
the choke control closes the choke plate on the
carburetor and aids in starting the engine.
Refer to Starting the Engine in the Operation section
of this manual for detailed starting instructions.
Ignition Switch Module
The ignition switch module is located on the left fender of the
tractor seated in the operator’s position, adjacent to the Throttle/
Choke Control. To start the engine, insert the key into the ignition
switch module and turn clockwise to the START position. Release
the key into the NORMAL MOWING MODE position once the
engine has fired.
To stop the engine, turn the ignition key counter-clockwise to the
STOP position. See Figure 4-2.
Start
position
Indicator
Light
Reverse
Push
Button
Normal
Driving
Mode
Stop
position
Reverse
Caution
Mode
Position
Figure 4-2
WARNING!
Never leave a running machine
unattended. Always disengage PTO, set parking
brake, stop engine and remove key to prevent
unintended starting.
IMPORTANT:
Prior to operating the tractor, refer to both Safety
Interlock Switches and Starting the Engine in the Operation
section of this manual for detailed instructions regarding the
Ignition Switch Module and operating the tractor in REVERSE
CAUTION MODE.
FAST
SLOW
Forward Drive Pedal
The forward drive pedal is located on the right side of the machine,
along the running board. Press the forward drive pedal forward to
cause the tractor to travel forward. Ground speed is also controlled
with the forward drive pedal. The further forward the pedal is
pivoted, the faster the tractor will travel. The pedal will return to its
original/neutral position when it’s not pressed.
Reverse Drive Pedal
The reverse drive pedal is located on the right side of the tractor
along the running board. Ground speed is also controlled with
the reverse drive pedal. The further downward the pedal is
pivoted, the faster the tractor will travel. The pedal will return to
its original/neutral position when it’s not pressed.
Brake Pedal
The brake pedal is located on the left side of the lawn tractor,
along the running board. Depress the pedal all the way down to
engage the disc brake and bring the tractor to a complete stop.
NOTE:
The brake pedal must be completely depressed to start
the engine. Refer to Safety Interlock Switches in the Operation
section of this manual.
Parking Brake
To set the parking brake, fully depress the brake pedal. Move the
parking brake lever all the way down and into the parking brake
position. Release the brake pedal to allow the parking brake to
engage.
To release the parking brake, depress the brake pedal and move
the parking brake lever out of the parking brake position. Release
the brake pedal.
NOTE:
The parking brake must be set if the operator leaves the
seat with the engine running or the engine will automatically
shut OFF.
Deck Lift Lever
Found on your tractor’s right fender, the deck lift lever is used to
change the height of the cutting deck. To use, move the lever to
the left, then place in the notch best suited for your application.
PTO Lever
Found on the tractor’s right fender, the PTO
(blade engage)
lever is used to engage power to the cutting deck. To operate,
move the lever all the way forward. Moving the lever all the way
rearward into the PTO OFF position disengages power to the
cutting deck.
NOTE:
The PTO
(blade engage)
lever must be in the disengaged
(PTO OFF) position when starting the engine.
16
S
ection
4— c
ontrolS
& F
eatureS
Summary of Contents for TB30R
Page 68: ...Notas 9 32 ...
Page 69: ...33 Section 9 Notas ...