PTO/Blade Engage Handle
Activating the PTO engages
power to the cutting deck or other
(separately available) attachments.
Push forward on the
PTO/Blade Engage handle to
activate it. Pull the PTO/Blade
Engage handle back to disengage
the power to the cutting deck
or other (separately available)
attachments.
NOTE:
The PTO/Blade Engage handle must be in the disengaged
(OFF) position when starting the engine.
Parking Brake/Cruise Control Lever
Located in the center of the tractor’s dash
panel below the steering wheel, the Parking
Brake/Cruise Control lever is used to engage
the parking brake and the cruise control.
Refer to the Operation section of this manual
for detailed instructions regarding the
parking brake.
NOTE:
The parking brake must be set if the
operator leaves the seat with the engine
running or the engine will automatically shut
off.
NOTE:
Cruise control can NOT be engaged
at the tractor’s fastest ground speed. If the
operator should attempt to do so, the tractor
will automatically decelerate to the fastest
optimal mowing ground speed.
WARNING!
Never leave a running machine
unattended. Always disengage PTO, set parking
brake, stop engine and remove key to prevent
unintended starting.
14
S
ection
4— c
ontrolS
and
F
eatureS
Summary of Contents for TB 2246
Page 33: ...Notes 11 33...
