background image

Important Safe Operation Practices

2

3

Operation

General Operation:

1. 

Read, understand, and follow all instructions on the 

machine and in the manual(s) before attempting to 

assemble and operate. Keep this manual in a safe place for 

future and regular reference and for ordering replacement 

parts.

2. 

Be familiar with all controls and their proper operation. 

Know how to stop the machine and disengage it quickly.

3. 

Never allow children under 14 years of age to operate this 

machine. Children 14 and over should read and understand 

the instructions and safe operation practices in this manual 

and on the machine and be trained and supervised by an 

adult.

4. 

This leaf blower is a powerful tool, not a plaything. 

Therefore, exercise extreme caution at all times. It has been 

designed to perform one job; to blow leaves. Do not use it 

for any other purpose.

5. 

Keep the area of operation clear of all persons, particularly 

small children and pets. Stop the engine when they enter 

the vicinity of the machine. 

6. 

Always wear safety glasses or safety goggles during 

operation and while performing an adjustment or repair, 

to protect eyes from debris or foreign objects that may be 

thrown from machine.

7. 

Wear close fitting slacks and shirt. Shirt and slacks that 

cover the arms and legs are recommended. Do not wear 

loose fitting clothes or jewelry and secure hair so it is above 

shoulder level. They can be caught in moving parts. 

8. 

Do not operate the machine while under the influence of 

alcohol or drugs.

9. 

Never place your hands or any part of your body or 

clothing near rotating parts. Keep clear of the discharge 

opening at all times. Never insert your hands, fingers, 

feet, or any other part of your body or clothing into the 

discharge or air intake openings as the rotating impeller 

inside the housing can cause serious injury. 

10.  Never operate machine without the plastic impeller 

guard properly affixed to the machine. This device shields 

the operator from accidental contact with the rotating 

impeller. 

11.  Keep all guards and safety devices in place and operating 

properly.

12.  Exercise caution when operating blower. Do not allow the 

directional discharge chute to point in the direction of 

bystanders or pets. 

WARNING! 

This symbol points out important safety instructions which, if not followed, 

could endanger the personal safety and/or property of yourself and others. Read and follow 

all instructions in this manual before attempting to operate this machine. Failure to comply 

with these instructions may result in personal injury. 

When you see this symbol. 

HEED ITS WARNING!

DANGER! 

This machine was built to be operated according to the safe operation practices in 

this manual. As with any type of power equipment, carelessness or error on the part of the 

operator can result in serious injury. This machine is capable of amputating fingers, hands, 

toes and feet and throwing debris. Failure to observe the following safety instructions could 

result in serious injury or death.

CALIFORNIA PROPOSITION 65

WARNING! 

Engine Exhaust, some of its constituents, and certain vehicle components 

contain or emit chemicals known to State of California to cause cancer and birth defects 

or other reproductive harm.

Summary of Contents for FLEX 23AACAAX711

































Reviews: