![background image](http://html.mh-extra.com/html/troy-bilt/290-253-081/290-253-081_installation-instructions-manual_1173354013.webp)
Step 3. Install Tines on Left
Outer Holder
Tines used in this step:
four
right-curved
tines
Follow Steps 1-A through 1-D
on Page 12 to install
right-
curved
tines on the left outer
holder. Make sure that the tines
are installed against the
outer
surface of the holder. Make sure
that all tips point
inward
, and all
cutting edges face forward. See
Figure 23.
Step 4: Install Tines on Right
Outer Holder
Tines used in this step:
four
left-curved
tines
Follow Step 2 on Page 12 to
install
left-curved
tines on the
right outer holder. Make sure
that the tines are installed against
the
outer
surface of the holder.
All tips point
inward
. See Figure
23 which shows PONY tines
completely installed.
Step 5: Check the Installation
This completes the installation
of the tines on your PONY
Tiller. To ensure that the
installation is correct, check for
the following:
❑
Make sure that the tips of all
tines are pointing
inward
(toward the transmission
housing).
❑
Make sure that the
cutting
edges
of all tines will enter
the soil first when the
tiller is moving forward.
Also read and follow the
instructions provided in the Bolo
Tines Maintenance Section on
Page 16.
13
Figure 23: PONY tines installed.
Eight Right-
curved Tines
Eight Left-
curved Tines
NOTE: Shaded tines
are installed first.
Innermost Tines
Innermost Tines