![background image](http://html1.mh-extra.com/html/troy-bilt/20240/20240_owners-manual_1173202007.webp)
7
ASSEMBLY
IMPORTANT: Read entire Operator’s Manual before you
attempt to assemble or operate your new pressure washer.
Remove Pressure Washer From
Carton
1.
Remove the parts bag, accessories, and inserts included
with pressure washer.
2.
Slice two corners at the end of carton from top to
bottom so the panel can be folded down flat.
3.
Remove pressure washer from carton.
Carton Contents
Items in the carton include:
•
Main Unit
•
Handle
•
High Pressure Hose
•
Spray Gun
•
Nozzle Extension with Quick Connect Fitting
•
Plastic Accessory Tray
•
Safety Goggles
•
Oil Bottle
•
Turbo Nozzle with Quick Connect
•
Rotating Brush
•
Utility Brush
•
Parts Bag (which includes the following):
•
Operator’s Manual
•
Engine Operator’s Manual
•
Owner’s Registration Card
•
Bag containing 4 multi–colored ProjectPro™
Nozzles
•
Handle/Tray Fastening Hardware Kit (which
includes):
•
Carriage Bolts (2)
•
“L” Bolt
•
Plastic Knobs (3)
•
Tree Clips (4)
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helpline at 1-888-611-6708. If calling for
assistance, please have the model, revision, and serial
number from the data tag available.
To prepare your pressure washer for operation, you
will need to perform these tasks:
1.
Fill out and send in registration card.
2.
Attach handle to main unit, then attach accessory tray
to handle.
3.
Add oil to engine crankcase.
4.
Add fuel to fuel tank.
5.
Connect high pressure hose to spray gun and pump.
6.
Connect water supply to pump.
7.
Attach nozzle extension to spray gun.
8.
Select/attach quick connect ProjectPro™ nozzle to
nozzle extension.
Attach Handle and Accessory Tray
1.
Place handle onto handle supports connected to main
unit. Make sure holes in handle align with holes on
handle supports (Figure 1).
NOTE: It may be necessary to move the handle supports
from side to side in order to align the handle so it will slide
over the handle supports.
Align Holes
Handle
Handle
Supports
Figure 1 — Attach Handle to Base
3
Section
Assembly
Summary of Contents for 20240
Page 20: ...20 Notes...