background image

2

TABLE OF CONTENTS

Content

Page

Warranty...........................................................................................................   2

Important Safe Operation Practices ..................................................................   4

Slope Gauge.....................................................................................................   7

Assembling Your Riding Mower ........................................................................   8

Know Your Riding Mower.................................................................................. 10

Operating Your Riding Mower........................................................................... 12

Making Adjustments ......................................................................................... 14

Servicing Your Rider Mower ............................................................................. 16

Maintaining Your Riding Mower ........................................................................ 18

Off-Season Storage .......................................................................................... 20

Troubleshooting ................................................................................................ 20

Parts List ........................................................................................................... 22

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new riding mower. It will help you assemble, prepare 
and maintain the unit for best performance. Please read and understand what it says. 

Before you start assembling your new equipment

, please locate the model plate on the 

equipment and copy the information from it in the space provided below. The information on 
the model plate is very important if you need help from our Customer Support Department or 
an authorized dealer. 

You can locate the model plate by pivoting the cover upward and looking under the frame. A sample 
model plate is explained below. For future reference, please copy the model number and the serial 
number of the equipment in the space below.

CALLING CUSTOMER SUPPORT

If you have difficulty assembling this product or have any questions regarding the controls, operation or 
maintenance of this unit, please call your service dealer. 

Before you call, make sure that you have your model and serial numbers ready. By having 
the model and serial numbers ready, you help the Customer Support Representative give 
you faster service. 

Copy the model number here:

Copy the serial number here:

XXX-XXXXXX

XXXXXXXXXXX

Model Number
Numéro de modèle

Serial Number
Numéro de série

TROYBILT - CANADA
KITCHENER, ON N2G 4J1

Summary of Contents for 13A-344-563






















Reviews: