Troy-Bilt 12A-998Q766 Operator'S Manual Download Page 2

2

TABLE OF CONTENTS

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new lawn mower. It will help you assemble, prepare and 
maintain the unit for best performance. Please read and understand what it says. 

Before you start assembling your new equipment, please locate the model plate on the 
equipment and copy the information from it in the space provided below. A sample model plate is 
also given below. You can locate the model plate by standing at the operating position and 
looking down at the rear of the deck. This information will be necessary to use the
manufacturer’s web site and/or help from the Customer Support Department or an authorized 
service dealer. 

CUSTOMER SUPPORT

Please do NOT return the unit to the retailer from where it was purchased, without first contacting Customer Support.

If you have difficulty assembling this product or have any questions regarding the controls, operation or 
maintenance of this unit, you can seek help from the experts. Choose from the options below:

Visit troybilt.com for many useful suggestions. Click on Customer Support button and you will 
get the four options reproduced here. Click on the appropriate button and help is immediately 
available. 

To reach a Customer Support Representative, please call 1-800-520-5520

The engine manufacturer is responsible for all engine-related issues with regards to 
performance, power-rating, specifications, warranty and service. Please refer to the engine 
manufacturer’s Owner’s/Operator’s Manual, packed separately with your unit, for more 
information.

Content

Page

Important Safe Operation Practices

3

Slope Gauge

6

Assembling Your Lawn Mower

7

Know Your Lawn Mower

9

Operating Your Lawn Mower

10

Making Adjustments

11

Maintaining Your Lawn Mower

13

Servicing Your Lawn Mower

14

Off-Season Storage

17

Troubleshooting

17

Illustrated Parts List

18

Warranty

24

Content

Page

Copy the model number here:

Copy the serial number here:

www.troybilt.com

TROY-BILT  LLC
P. O. BOX    3 6 1 1 3 1
CLEVELAND, OH 44136

1-800-520-5520

330-558-7220

The answer you are
looking for could be just
a mouse click away!

The answer you are
looking for could be just
a mouse click away!

Engine

Manual

Summary of Contents for 12A-998Q766

























Reviews: