background image

2

TABLE OF CONTENTS

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new equipment. It will help you assemble, prepare and maintain the unit for 
best performance. Please read and understand what it says. 

Before you start assembling your new equipment

, please locate the model plate on the equipment and copy the 

information from it in the space provided below. A sample model plate is also given below. You can locate the model 
plate by standing at the operating position and looking down at the rear of the deck . This information will be 
necessary to use the manufacturer’s web site and/or help from the Customer Support Department or an authorized 
service dealer. 

ENGINE INFORMATION

The engine manufacturer is responsible for all engine-related issues with regards to performance, power-rating, specifications, 
warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual packed separately with your unit for 
more information.

CALLING CUSTOMER SUPPORT

Please do NOT return the unit to the retailer from which it was purchased, without first contacting Customer Support.

If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance 
of this unit, please call a Customer Support Representative: 

1-800-668-1238

Please have your unit’s model number and serial number ready when you call. See previous section to locate this 
information. You will be asked to enter the serial number in order to process your call.

HOW TO OBTAIN SERVICE

Warranty service is available, WITH PROOF OF PURCHASE, through your local authorized service dealer. To 
locate the dealer in your area;

Contact MTD Products Limited, Kitchener, ON N2G 4J1, or call 1-800-668-1238 or log on to our Web site at 
www.mtdcanada.com.

Content

Page

Customer Support

2

Important Safe Operation Practices

3

Slope Gauge

5

Setting Up

6

Operating Your Lawn Mower

8

Adjustments

10

Maintenance

11

Troubleshooting

13

Parts List

14

Warranty

16

Content

Page

XXX-XXXXXX

XXXXXXXXXXX

Model Number
Numéro de modèle

Serial Number
Numéro de série

TROYBILT - CANADA
KITCHENER, ON N2G 4J1

Copy the model number here:

Copy the serial number here:

Summary of Contents for 080 Series
















Reviews: