Supply package, transport and storage
Pharmaceutical clean room terminal filter supply
package
TFP housing
Diffuser face
Filter element (optional)
Transport
CAUTION!
Danger of injury from sharp edges, sharp cor-
ners and thin sheet metal parts!
Sharp edges, sharp corners and thin sheet metal
parts may cause cuts or grazes.
–
Be careful when carrying out any work.
–
Wear protective gloves, safety shoes and a
hard hat.
Use only lifting and transport gear designed for the
required load. Always secure the load against tip-
ping and falling.
Upon delivery, carefully remove the packaging and
check the unit for transport damage and complete-
ness.
Storage
Please note:
Store the unit only in its original packaging
Protect the unit from the effects of weather
Protect the unit from humidity, dust and con-
tamination
Storage temperature: -10 °C to 50 °C.
Relative humidity: 95 % max., no condensation
Assembly
General information
Personnel:
HVAC technician
Protective equipment:
Industrial safety helmet
Protective gloves
Safety shoes
DANGER!
Danger of death from the fall of suspended
loads!
–
Only use fixing materials designed for the
required load.
–
Use all hanging brackets supplied.
–
Stand clear of suspended loads, unless
properly secured.
–
Check secure fixing after installation.
Fix the unit only to load-bearing ceilings.
Load suspension systems only with the weight
of the unit. Adjacent components and con-
necting ducts must be supported separately.
Do not unpack the diffuser face and any filter
element until you are ready to install them.
NOTICE!
Possible malfunction due to a damaged
casing
If the casing has been damaged, unfiltered (con-
taminated) air may leak.
Do not drill any holes into the casing.
Only work in pairs; preferably use a lift.
To prevent damage to the diffuser face,
remove it before assembling the filter casing,
Ä
‘Removing the diffuser face’ on page 8
Supply package, transport and storage
TFP Pharmaceutical clean room terminal filters
4
