3
Transport, storage and
packaging
3.1 Supply package
Check the packages on arrival for transport damage
and completeness. If necessary, carefully remove and
then replace the packaging.
Supply package:
TROX air purifier
Fixing brackets
Prefilter and HEPA H13 filter (inserted in the unit)
Operating manual
Transport damage
If there is any visible damage, proceed as follows:
Either do not accept the delivered items, or accept
them with reservations.
Note down the damage on the shipping documents
or on the shipping company's delivery note.
File a complaint.
File a complaint as soon as you detect any damage.
Claims for damages can only be filed within the
applicable complaint periods.
3.2 Transport to the installation loca-
tion
Protective equipment:
Safety shoes
WARNING!
Risk of injury due to loss of stability!
When the unit is upright, the high centre of gravity
and small footprint represent a high risk of tipping
over during unloading, transport and installation.
Be sure to take adequate precautions:
–
If possible, transport the unit lying on the pallet to
the installation site.
–
When the unit is upright, use additional means to
prevent it from tipping over (e.g. lashing with
ratchet straps).
–
Use only lifting and transport gear designed for
the required load.
–
When setting the unit upright, secure it against
shifting and tipping over until installation is com-
plete.
If possible, do not remove the unit from the pallet
until you reach the installation site.
Use a pry bar and pincers to unpack the unit from
the pallet.
If the unit is transported without a pallet, the foil
packaging must remain on the unit until it is installed
on site to protect against damage to the paintwork.
Fig. 5: Transport with pallet truck or forklift
Fig. 6: Setup:
1. Lifting
2. Move to the edge of the pallet
3. Set upright carefully on the floor
Fig. 7: Transport by trolley
Transport, storage and packaging
Transport to the installation location
TROX AIR PURIFIERS TAP-L
TAP-M
12
