Trox Technik EM-IP, Configuration Manual, Page: 22 / 80

Reboot
1. Select the ‘Setup’ menu from the menu bar.
Fig. 36: Reboot
2. Under ‘System’ , on the left, select ‘Reboot’ .
ð
The ‘Reboot’ (Fig. 33) menu is displayed.
3. Select ‘Activate configuration’ .
4.
Follow the instructions on the screen.
Use the ‘Reboot’ button to start the reboot
process.
3.5.7.10 Modbus/IP
Fig. 37: Modbus/IP
The ‘Modbus/IP’ dialogue allows you to set slave
addresses and the TCP port.
TCP port
Enter the TCP port to be used for Modbus into the
[TCP-Port] field.
The default value is 502.
Slave address
Enter the Modbus slave address for EM-IP into the
[Slave address] field.
The default value is 1.
Enter settings
1. Select the ‘Setup’ menu from the menu bar.
2. Under ‘Modbus’ , on the left, select ‘Modbus/IP’ .
ð
The ‘Modbus/IP’ (Fig. 37) menu is displayed.
3. Enter the new values.
4. Use [Save] to save your entries.
3.5.7.11 Editing a BACnet/IP configuration
Fig. 38: Editing a BACnet/IP configuration
The ‘Edit BACnet/IP configuration’ allows you to set the
properties for a BACnet device object.
Web server settings
Web server navigation > Functions of the Setup menu
Expansion module EM-IP 22